Black & Decker Cordless Saw Cordless Saw User Manual

0

Out of 0 Ratings

Owner's of the Black & Decker Cordless Saw Cordless Saw gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 6
 

• Cutonlywithsharpblades;theycutcleaner,fasterandputlessstrainonthemotor
while cutting.
• Whencutting,alwaysensurethattheshoeisrestingfirmlyagainsttheworkpiece.This
will improve operator control and minimize vibration.
• Forlongerbladelife,usebi-metalblades.Theseutilizeacarbonsteelbackweldedto
high speed steel teeth making the blade more flexible and less prone to breaking.



• Avoidusingsolventswhencleaningplasticparts.Mostplasticsaresusceptibleto
various types of commercial solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust etc.
• Whenelectrictoolsareusedonfiberglassboats,sportscars,drywalletc.,theyare
subject to accelerated wear and possible premature failure, as the fiberglass chips and
grindings and drywall dust are highly abrasive to bearings, brushes, commutator, etc.
During any use on fiberglass or drywall it is extremely important that the tool be cleaned
frequently by blowing with an air jet.

Your saw was properly lubricated before leaving the factory. Once every year take or send
your saw to a Black & Decker service center, or authorized service station, for a complete
cleaning, inspection and lubrication. Tools “out of service” for long periods should be
relubricated before being put back to work.
 To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment should be performed by authorized service centers or other qualified service
personnel, always using identical replacement parts


The RS600 and RS601 Reciprocating Saws will accept up to a 12 inch long blade. Always
use the shortest blade suitable for your project but long enough to keep the blade cutting
through the material. Longer blades are more likely to be bent or damaged during use.
During operation some longer blades may vibrate or shake if the saw is not kept in contact
with the workpiece.

A pruning attachment is also available for use with your RS600 and RS601 Reciprocating
Saw. This accessory attaches to the shoe of the saw and applies spring loaded pressure to
the branch while cutting.
Recommended accessories for use with your saw are available from your local dealer or authorized
service center. If you need assistance regarding accessories, please call: 1-
 The use of any accessory not recommended for use with this tool could be
hazardous.

  
• Unitwillnotstart. •Cordnotpluggedin. •Plugtoolintoaworkingoutlet.
•Circuitfuseisblown. •Replacecircuitfuse.(Iftheproduct
repeatedly causes the circuit fuse to
blow, discontinue use immediately and
have it serviced at a Black & Decker
servicecenterorauthorizedservicer.)
•Circuitbreakeris •Resetcircuitbreaker.(Iftheproduct
tripped. repeatedly causes the circuit breaker
to trip, discontinue use immediately and
have it serviced at a Black & Decker
servicecenterorauthorizedservicer.)
•Cordorswitchis •Havecordorswitchreplacedat
damaged. Black & Decker Service Center or
Authorized Servicer.
For assistance with your product, visit our website  for the
location of the service center nearest you or call the BLACK & DECKER help line at


All Black & Decker Service Centers are staffed with trained personnel to provide customers
with efficient and reliable power tool service. Whether you need technical advice, repair, or
genuine factory replacement parts, contact the Black & Decker location nearest you. To find
your local service location, refer to the yellow page directory under “Tools—Electric” or call:


Black&Decker(U.S.)Inc.warrantsthisproductfortwoyearsagainstanydefectsinmaterial
or workmanship. The defective product will be replaced or repaired at no charge in either of
two ways.
The first, which will result in exchanges only, is to return the product to the retailer from
whomitwaspurchased(providedthatthestoreisaparticipatingretailer).Returnsshouldbe
madewithinthetimeperiodoftheretailer’spolicyforexchanges(usually30to90daysafter
thesale).Proofofpurchasemayberequired.Pleasecheckwiththeretailerfortheirspecific
return policy regarding returns that are beyond the time set for exchanges.
Thesecondoptionistotakeorsendtheproduct(prepaid)toaBlack&Deckerownedor
authorized Service Center for repair or replacement at our option. Proof of purchase may be
required.Black & Decker owned and authorized Service Centers are listed under
“Tools-Electric”intheyellowpagesofthephonedirectory.
This warranty does not apply to accessories. This warranty gives you specific legal rights
and you may have other rights which vary from state to state or province to province. Should
you have any questions, contact the manager of your nearest Black & Decker Service
Center. This product is not intended for commercial use.
: If your warning labels become illegible or are
missing, call 1-800-544-6986 for a free replacement.
 This warranty does not apply to products sold in Latin America. For
products sold in Latin America, check country specific warranty information contained in the
packaging, call the local company or see the website for warranty information.

Make sure the extension cord is in good condition before using. Always use the proper size
extension cords with the tool – that is, proper wire size for various lengths of cord and heavy
enough to carry the current the tool will draw. Use of an undersized cord will cause a drop in
line voltage resulting in loss of power and overheating. For proper size cords see chart below.

Be sure your power supply agrees with nameplate marking. 120 Volts AC only means your
tool will operate on standard 60 Hz household power. Do not operate AC tools on DC. A
rating of 120 volts AC/DC means that you tool will operate on standard 60 Hz AC or DC
power. This information is printed on the nameplate. Lower voltage will cause loss of power
andcanresultinover-heating.AllBlack&Deckertoolsarefactory-tested;ifthistooldoes
not operate, check the power supply.


 Always wear eye protection while operating this power tool.
Before cutting any type of material, be sure it is firmly anchored or clamped to
prevent slipping.
• Placebladelightlyagainstworktobecut.
• Switchonsawmotorbeforeapplyingpressure.
• Alwaysholdsawfirmlywithbothhandswhilecuttingasshownin Whenever
possible, the saw shoe must be held firmly against the material being cut. This will
prevent the saw from jumping or vibrating and minimize blade breakage.

Depress the trigger switch to turn tool “ON”. Releasing the trigger turns the tool “OFF”
NOTE: This tool has no provision to lock the switch in the ON position, and should never
be locked in the ON position by any other means.

The variable speed selector wheel offers a choice of speeds for greatly improved cutting
rates in various materials. To select a slower speed for operating the saw, rotate the wheel to
a low number on the dial. To select a higher speed, rotate the wheel to a higher number.

The2-speedselectoroffersachoiceofspeedsforgreatlyimprovedcuttingratesinvarious
materials.NotethattheHigh-Speedsettingismoreefficientinsoftermaterialssuchas
wood,whiletheLow-Speedisbestforcuttingmetals.
LOWSPEED(Moveslideswitchtoshow1).Forcuttingsheetmetal,metalpipe,metal
conduit, etc.
HIGHSPEED(Moveslideswitchtoshow2).Forcuttingwood,plastic,compositionboards
and other similar materials.

 

To install blade into saw:
1. Lift the blade clamp release lever to its full open position as shown in Figure 4.
2. Insert blade shank from the front locating hole in blade over pin on reciprocating shaft.
3.Closebladeclampreleaselever.
4. Check to ensure blade is secure before cutting.
To remove blade from saw:
1. Open blade clamp release lever to its full open position.
2. Remove blade.

 TURN OFF AND UNPLUG SAW.
The shoe will adjust to limit the depth of cut. Hold the saw with the underside facing up.
Pushthebutton(showninFigure5)onthehandgripandslidetheshoeouttooneofthe
three settings and release the button.

• Thecompactdesignofthereciprocatingsawmotorhousingandpivotingshoepermit
close cutting to floors, corners and other difficult areas.
• Tomaximizeflushcuttingcapabilities,insertthebladeshaftintothebladeclampwith
the teeth of the blade facing up.
• Turnthesawupsidedownsoyouareasclosetotheworksurfaceaspossible.

• Useafinerbladeforferrousmetalsandacoarsebladefornon-ferrousmaterials.
• Inthingaugesheetmetalsitisbesttoclampwoodtobothsidesofsheet.Thiswill
ensure a clean cut without excess vibration or tearing of metal.
• Avoidforcingcuttingbladeasthisreducesbladelifeandcausescostlybladebreakage.
 Spread a thin film of oil or other coolant along the line ahead of the saw cut for
easier operation and longer blade life. For cutting aluminum, kerosene is preferred.

• Measurethesurfaceareatobecutandmarkclearlywithapencil,chalkorscriber.
• Insertbladeinbladeclampandtightenbladeclampsecurely.
• Tipthesawbackwarduntilthebackedgeoftheshoeisrestingontheworksurfaceand
the moving blade will clear the surface.
• Switchmotoron,permittingbladetoobtainmaximumspeed.
• Griphandlesteadilyandbeginaslow,deliberateupwardswingwiththehandleofthesaw.
• Thebladewillbegintofeedintomaterial.Alwaysbesurebladeiscompletelythrough
material before continuing with pocket cut.
 In areas where blade visibility is limited, use the edge of the shoe as a guide.




Sales
Black & Decker
(U.S.)Inc.,
701 E. Joppa Rd.
Towson, MD 21286
U.S.A.
CONSERVER LE PRÉSENT GUIDE À TITRE DE RÉFÉRENCE
MODE D’EMPLOI




à 

Si des questions ou des problèmes surgissent après l’achat d’un produit Black & Decker,
consulter le site Web

Si la réponse est introuvable ou en l’absence d’accès à Internet, composer le
1-800-544-6986 de 8 h à 17 h HNE, du lundi au vendredi, pour parler avec un agent.
Prière d’avoir le numéro de catalogue sous la main lors de l’appel.
pour obtenir des réponses instantanément 24 heures par jour.
8

 
120V 0-25 26-50 51-100 101-150
(0-7,6m)(7,6-15,2m)(15,2-30,4m)(30,4-45,7m)
240V 0-50 51-100 101-200 201-300
(0-15,2m)(15,2-30,4m)(30,4-60,9m)(60,9-91,4m)

More Not more American Wire Gage
Than Than
0 - 6 18 16 16 14
6 - 10 18 16 14 12
10 - 12 16 16 14 12
12 - 16 14 12 NotRecommended
6
7

   Find Your Products By Category