0

Out of 0 Ratings

Owner's of the Canon Camcorder XF305 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 201
 
41
Preparations
2
Preparing Recording Media
NOTES
If both CF card slots contain a CF card and you open the cover of the
selected slot, the camcorder will automatically switch to the other slot.
You cannot use the SLOT SELECT button to switch between CF card
slots while recording.
When the bit rate is set to 50 Mbps (0 51) during slow motion
recording, relay recording is not available.
Checking the Available Recording Time
When the camcorder is in mode, the screen indicates which CF
card slot is in use and the available recording time (in minutes*) that
remains on each CF card. When the camcorder is in mode, the
side panel indicates the available recording time.
On the [Media] status screen (0 174), you can check the available
recording time, total space and used space of each recording media, and
the available number of photos.
* The approximate available recording time is based on the current bit rate (0 51).
Recovering Data on the CF Card
An error may occur with data on the CF card in cases such as turning off
the camcorder while recording or removing the CF card while recording.
In such case, you may be able to recover the data on the CF card.
1 Insert the CF card with the data to be recovered into the
camcorder.
2 When the screen prompts you to recover the data, select [Yes]
and then press SET.
NOTES
This procedure will delete clips shorter than 10 seconds in length.
Additionally, up to 10 seconds will be deleted from the end of clips on
the CF card.
In some cases, data may not be recovered, such as when the FAT32
file system is corrupted or the CF card is physically damaged.
While you are recording, you can recover data on the CF card that is
not being recorded to.
Operating modes: