Canon Camcorder XF300 User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder XF300 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 201
 
Preparations
40
2
Preparing Recording Media
To initialize a CF card
3 Select [OK] and then press SET.
4 When the confirmation message appears, press SET.
• The CF card is initialized and all the data it contains is erased.
To initialize an SD card
3 Select [Complete] (complete initialization) or [Quick] (quick
initialization) and then press SET.
4 Select [OK] and then press SET.
• If you are using the [Complete] initialization option, press SET twice
to cancel the operation while it is in progress. You can use the SD
card but all data will be erased.
5 When the confirmation message appears, press SET.
• The SD card is initialized and all the data it contains is erased.
IMPORTANT
• Initializing the recording media will permanently erase all data, including
clips with an e mark, protected photos, and custom picture
information. Lost data cannot be recovered. Make sure you save
important recordings in advance.
• Depending on the SD card, the complete initialization may take up to a
few minutes.
NOTES
• While recording on a CF card, you can initialize another CF card in the
other CF card slot.
Switching Between the CF Card Slots
The camcorder features two CF card slots, CFj (CF card slot A) and
CFl (CF card slot B). If both slots contain a CF card, you can switch
between them as necessary. In addition, if the CF card you are using
becomes full while recording, the recording will continue uninterrupted on
the other CF card (relay recording). Relay recording is available from CF
card slot A to CF card slot B, and vice versa.
Press the SLOT SELECT button.
• The access indicator of the selected CF card slot will illuminate in
green.
Operating modes:

   Find Your Products By Category