Canon Camcorder Canon XA10 Professional Camcorder User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder Canon XA10 Professional Camcorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 191
 
Focus Adjustment
53
Options (
Default value)
NOTES
• While using autofocus, you can turn the manual ring to focus manually. When you stop turning the
ring, the camcorder returns to autofocus. This is useful in situations such as when focusing on a
subject on the other side of a window.
• When recording in bright surroundings, the camcorder closes down the aperture. This may cause
the picture to appear blurred and is more noticeable toward the wide angle end of the zoom range.
In such case, set 7 [ND Filter] to [O Automatic].
• When you set 7 [Conversion Lens] to a setting other than [B Off], the [ Instant AF]
and [ Medium AF] settings are not available.
• Autofocus takes longer to focus when the frame rate is set to [o PF30], [E PF24] or
[ 24P] than when it is set to [C 60i (Standard)].
• When recording under dark conditions, the focusing range narrows and the picture may appear
blurred.
• Autofocus may not work well on the following subjects or in the following cases. In such case, focus
manually.
- Reflective surfaces
- Subjects with low contrast or without vertical lines
- Fast moving subjects
- Through dirty or wet windows
- Night scenes
Face Detection
The camcorder automatically detects people’s faces and uses this information to select the optimal
focus and exposure settings.
* Face detection is always activated in mode.
POINTS TO CHECK
• Select a recording program other than [q Night Scene], [p Low Light], [M Fireworks] or
[y Manual Exposure].
By default, face detection is activated. If the function was turned off, perform the following procedure
to turn it on.
[R Instant AF]
Sets the autofocus to Instant AF. The focus is adjusted at the highest speed. This
mode is useful even when recording in very bright or low-light surroundings. This mode uses both the
TTL system and external sensor for focusing.
[Medium AF]Sets the autofocus to Medium AF. The camcorder focuses more smoothly on the
subject than when using the [R Instant AF] setting. This mode uses both the TTL system and
external sensor for focusing.
[S Normal AF] Sets the autofocus to Normal AF. The autofocus adjustment is made at a stable
speed.
Operating modes:
*
COPY

   Find Your Products By Category