0

Out of 0 Ratings

Owner's of the Canon Camcorder Canon VIXIA HF G10 Compact High Definition Camcorder gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 184
 
Using an External Microphone
74
2 Connect the receiver to the camcorder’s MIC terminal.
3 If necessary, activate the audio mix function (0 70) and adjust the audio mix balance.
4 Attach the microphone (transmitter) to the subject.
For details about using the WM-V1, refer to the instruction manual supplied with the microphone.
Using Commercially Available Microphones
You can also use commercially available condenser microphones with their own power supply. You
can connect almost any stereo microphone with a 3.5 mm plug but audio recording levels may vary.
1 Connect the external microphone to the MIC terminal.
2 Open the [MIC Terminal Input] screen.
[FUNC.] [MENU] 7 [MIC Terminal Input]
3 Touch [Microphone] and then touch [a].
If necessary, activate and adjust the audio mix balance
(0 70).
NOTES
When an external microphone is connected to the camcorder, 7 [Wind Screen] will
automatically be set to [B Off Z].
If the audio level is too high and the sound gets distorted, adjust the audio recording level manually
(0 67).
When using an external microphone, make sure that the jacket covering above the plug is smaller
than 9.5 mm.
When using the optional SM-V1 Surround Microphone:
- Change the microphone’s directionality mode with the 7 [Surround Mic Directionality]
setting.
- You can enjoy the full effect of recordings made with 5.1ch surround sound on HDTVs compatible
with 5.1ch surround sound connected to the camcorder using the supplied HDMI cable. Audio
output from the AV OUT/X terminal (including headphone output) will be converted to 2ch
stereo. The camcorder’s built-in speaker is monaural.
MIC terminal
COPY