Canon Printer 2163B002 User Manual

3.4

Out of 3 Ratings

Owner's of the Canon Printer 2163B002 gave it a score of 3.4 out of 5. Here's how the scores stacked up:

  • Reliability

    3.33 out of 5

  • Durability

    3.33 out of 5

  • Maintenance

    3.33 out of 5

  • Performance

    3.33 out of 5

  • Ease of Use

    3.67 out of 5
of 200
 
Chapter 8
8-1
8.1 Outline
8.1.1 Outline
0014-9474
The printer indicates errors using the display and LEDs.
If an error occurs during printing, the printer status is also displayed on the status monitor of the printer driver.
The following three types of errors are displayed on the display:
- Warning
Status where the print operation can be continued without remedying the cause of the problem. This can, however, adversely affect the printing results.
- Error
Status where the print operation is stopped, and the regular operation cannot be recovered until the cause of the problem is remedied.
- Service call error
When a service call error occurs, the error is not cleared and the error indication remains on the operation panel even if the printer is powered off and on again.
(Occurrence of the service call error is indicated again at power-on.)
This measure is taken to prevent user's recovery of the service call error and damages to the printer.
Service call errors can be cleared, however, by starting up the printer in the service mode.
For how to take actions against warnings and errors, refer to "Troubleshooting".
Overview of warnings and error codes
The codes of warnings and errors are shown below acording to the system.
T-8-1
* "x" stands for a numeric or letter.
8.2 Warning Table
8.2.1 Warnings
0014-9408
The codes correspond to the numbers shown on the DIPLAY in the service mode.
T-8-2
Code Diagnosis
0181xxxx-xxxx Ink warning
0180xxxx-xxxx Printhead warning
0184xxxx-xxxx Maintenance cartridge warning
0134xxxx-xxxx GARO warning
0303xxxx-xxxx Cover error
0301xxxx-xxxx
0306xxxx-xxxx
0386xxxx-xxxx
Media error
0313xxxx-xxxx Sensors, fans, motors error
0380xxxx-xxxx Printhead error
0381xxxx-xxxx
0383xxxx-xxxx
Ink error
0384xxxx-xxxx Maintenance cartridge error
0387xxxx-xxxx Cutter unit error
0389xxxx-xxxx Media take-up unit error
0390xxxx-xxxx Firmware error
Exxx-xxxx Service call error
Code Display massage Status
01810104-1000 Ink Lv1: Chk BK ink tank is almost empty
01810101-1001 Ink Lv1: Chk Y ink tank is almost empty
01810102-1002 Ink Lv1: Chk M ink tank is almost empty
01810103-1003 Ink Lv1: Chk C ink tank is almost empty
01810112-1004 Ink Lv1: Chk PM ink tank is almost empty
01810113-1005 Ink Lv1: Chk PC ink tank is almost empty
01810106-1006 Ink Lv1: Chk MBK ink tank is almost empty
01810105-1008 Ink Lv1: Chk GY ink tank is almost empty
01810115-1009 Ink Lv1: Chk PGY ink tank is almost empty
01810107-100A Ink Lv1: Chk R ink tank is almost empty
01810109-100B Ink Lv1: Chk B ink tank is almost empty
01810108-100C Ink Lv1: Chk G ink tank is almost empty
01841001-281A Check maint cartridge capacity. Maintenance cartridge is almost full
01810304-1400 Ink tank is empty. Replace the ink tank. BK ink tank is empty
01810301-1401 Ink tank is empty. Replace the ink tank. Y ink tank is empty
01810302-1402 Ink tank is empty. Replace the ink tank. M ink tank is empty
01810303-1403 Ink tank is empty. Replace the ink tank. C ink tank is empty
01810312-1404 Ink tank is empty. Replace the ink tank. PM ink tank is empty
01810313-1405 Ink tank is empty. Replace the ink tank. PC ink tank is empty
01810306-1406 Ink tank is empty. Replace the ink tank. MBK ink tank is empty
01810305-1408 Ink tank is empty. Replace the ink tank. GY ink tank is empty
01810315-1409 Ink tank is empty. Replace the ink tank. PGY ink tank is empty
01810307-140A Ink tank is empty. Replace the ink tank. R ink tank is empty

   Find Your Products By Category