0

Out of 0 Ratings

Owner's of the Crane Dehumidifier Droplet Humidifiers gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 11
 
6
ASSEMBLY
ALWAYS use fresh cool water when operating the humidifier.
1. Turn Water Tank upside down and unscrew Water Tank Cap.
2. Fill Water Tank with cool water. DO NOT fill water all the way to the rim.
DO NOT CARRY FULL WATER TANK BY HANDLE. ALWAYS HOLD WATER
TANK WITH TWO HANDS.
DO NOT use hot water.
DO NOT add any medication, essential oils, or salt.
DO NOT pour water into Mist Outlet Channel.
3. Screw Water Tank Cap back onto Water Tank. Turn the Water Tank over and place
on Humidifier Base, making sure it fits perfectly.
NOTE: Do not attempt to move the humidifier while Water Tank is placed on the
Humidifier Base. Doing so may cause leakage of water and/or Humidifier Base to
overfill.
4. Plug the power cord into a wall socket and turn on the unit by using the Control
Button. While the water is transferring from the tank to the base, the Power
Indicator Light may illuminate in red. Within a few seconds, it will switch to green,
indicating that there is enough water in the Humidifier Base. Mist will begin emitting
through the Mist Lid.
5. Use the Control Button to adjust the intensity of the mist output. By turning the
humidifier on, you have activated LOW output. For MEDIUM output, press the
Control Button again. For HIGH output press the control button once more.
NOTE: After about 20 seconds, the Green Power Indicator Light will turn off.
SET THE CORRECT HUMIDITY OUTPUT: Choose the setting that allows the mist to
rise up to be absorbed by the room air. Do not set Control Knob too high, as the mist
cannot be absorbed by the air and may accumulate on the surfaces around the
humidifier.
6. When the humidifier runs out of water, the Power Indicator Light will turn red and
the mist output will stop. This is a safety feature to prevent the humidifier from
possibly overheating and damaging the Nebulizer. Turn the humidifier off and
unplug the unit before removing and refilling the water tank.
Note: The Power Indicator Light on the humidifier will remain on. The red light
indicates that the humidifier is turned on and needs to be refilled.