DeWalt Automobile Battery Charger DC9096 User Manual

5.0

Out of 3 Ratings

Owner's of the DeWalt Automobile Battery Charger DC9096 gave it a score of 5.0 out of 5. Here's how the scores stacked up:

  • Reliability

    5.0 out of 5

  • Durability

    5.0 out of 5

  • Maintenance

    5.0 out of 5

  • Performance

    5.0 out of 5

  • Ease of Use

    5.0 out of 5
of 36
 
Motor
Your DEWALT tool is powered by a DEWALT-built motor. Be sure your
power supply agrees with the nameplate markings.
Voltage decrease of more than 10% will cause loss of power and over-
heating. All D
EWALT tools are factory tested; if this tool does not oper-
ate, check your battery pack.
Dual Range Switch (Fig. 2)
This dual range saw offers a choice of speeds for greatly improved
cutting rates in various metals and a lock position. Note that the High
Range (2) setting is more efficient in softer materials such as wood,
while the Low Range (1) setting is best for cutting metals.
LOW RANGE - For cutting metal sheet, pipe, conduit, etc.
HIGH RANGE - For cutting wood, plastic, composition boards and
other similar materials.
Blade Storage (Fig. 3)
A slot has been provided for storage of
a spare blade. Be sure that the teeth
are facing in, as shown, when inserting
the blade. Press the blade all the way
in, so that the jaws will catch and hold
the blade.
Adjustable Shoe
(Fig. 4)
CAUTION: LOCK TRIGGER SWITCH AND REMOVE BATTERY.
The shoe will adjust to limit the depth of cut. Hold the saw with the
underside facing up. Push the button on the hand grip and slide the
shoe out to one of the three settings and release the button.
Blade Clamp Release Lever (Fig. 5)
CAUTION: LOCK TRIGGER SWITCH AND REMOVE BATTERY.
To install blade into saw:
1. Open blade clamp release lever up.
2. Insert blade shank from the front.
3. Close blade clamp release lever down.
To Remove blade from saw:
1. Open up blade clamp release lever.
2. Remove blade.
OPERATION
CAUTION: Always wear eye protection
while operating this or any other power tool.
Flush-To Cutting (Fig. 6)
The compact design of the saw motor hous-
ing and spindle housing permits extremely
close cutting to floors, corners and other dif-
ficult areas.
CAUTION: When sawing into walls, floors
or wherever “live” electrical wires may be
encountered, DO NOT TOUCH ANY FRONT
METAL PARTS OF THE TOOL! Hold the tool
7
English
FIG. 3
FIG. 2
A
B
C
FIG. 4
A
FIG. 5
FIG. 6

   Find Your Products By Category