0

Out of 0 Ratings

Owner's of the Black & Decker Edger Black & Decker Edger gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 48
 
tabclicksintoplace(Ensure
thattheguiderails(D1)on
theguard(D2)arecorrectly
alignedwiththeguiderails
(D3)onthetrimmerhead(D4)
(figure D).
Thelockingtab(D5)
shouldsnappedintothehousing
slot(D6).
•Securetheguardwiththe
screw(E1)(figure E).
ATTACHING THE AUXILIARY
HANDLE (FIGURES F AND G)
•Pushtheauxiliaryhandle
(F1)ontothetube(F2).
•Slidethebolt(G1)through
theholesintheauxiliary
handle.
•Tightentheknob(G2)
ontotheboltbyturningit
clockwise.
ADJUSTING THE POSITION
OF THE AUXILIARY HANDLE
(FIG. G)
Theauxiliaryhandlecanbe
adjustedtoprovideoptimum
balanceandcomfort.
•Loosentheknobonthe
boltbyturningitcounter
clockwise.
•Gentlyslidetheauxiliary
handleupordownthetube
tothedesiredheight.
•Tightentheknobontothe
boltbyturningitclockwise.
8
WARNING: Beforeassembly,makesurethatthetoolis
switchedoffandthebatteryhasbeenremoved.
ASSEMBLY TOOLS REQUIRED (NOT SUPPLIED):
-PhillipsScrewdriver
WARNING: Removethebatterybeforeattemptingtoattachany
ofthefollowingcomponents.
ATTACHING THE GUARD
(FIGURES D AND E)
WARNING: NEVER
OPERATETOOLWITHOUT
GUARDFIRMLYINPLACE.
Theguardmustalwaysbe
properlyattachedonthetoolto
protecttheuser.
•Removethescrewfromthe
guard.
•Keepingtheguardsquareto
thetrimmerheadslideitfully
intoplaceuntiltheretaining
E
E1
F
F1
F2
ASSEMBLY & ADJUSTMENT
G
G2
G1
D
D2
D1
D3
D4
D6
D5
LI-ION Battery Packs and Chargers
Thisproductcanacceptanyofthebatteriesand
chargerslistedinthechartbelow.
Batteries:LI-ION  LBX36
LBXR36
LBXR2036
Chargers:LI-ION LCS36
LCS436
Description Cat. #