Canon Camcorder XA20 User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder XA20 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 187
 
Connecting to an External Monitor
108
Selecting the Terminal Used For Output
To output your recordings on an external monitor, you must first select which terminal you will use.
1 Open the [Output Terminal] screen.
[FUNC.] > [MENU] > q > [Output Terminal]
• Touching [FUNC.] is necessary only when performing the procedure in mode.
2 Touch the desired option and then touch [X].
• If you selected [ HD/SD-SDI], [ HD/SD-SDI & HDMI] or [ HDMI], continue with the
relevant procedure below to configure the output signal.
Options
Using the HD/SD-SDI Terminal
The digital signal output from the HD/SD-SDI terminal includes the video signal, audio signal and time
code signal. If necessary, perform the following procedure to change the output to HD or SD.
1 Open the [HD/SD-SDI Output] screen.
[FUNC.] > [MENU] > q > [HD/SD-SDI Output]
• Touching [FUNC.] is necessary only when performing the procedure in mode.
2 Touch the desired option and then touch [X].
NOTES
• By default, onscreen displays will be embedded in the output video signal. You can change this
using the q > [Output Onscreen Displays] setting.
Using the HDMI OUT Terminal
The HDMI
TM
OUT terminal also offers a digital connection and outputs both a video and audio signal.
If you selected [k Automatic], the output signal will automatically switch to HD or SD depending on
the capability of the external monitor. In mode, when the recording mode is set to 28 Mbps
LPCM (59.94P) or 24 Mbps LPCM, the HDMI OUT terminal outputs two-channel linear PCM audio
with a sampling frequency of 48 kHz.
1 Open the [HDMI Output] screen.
[FUNC.] > [MENU] > q > [HDMI Output]
• Touching [FUNC.] is necessary only when performing the procedure in mode.
2 Touch the desired option and then touch [X].
[j Off]
There is no output from any terminal.
[ HD/SD-SDI]There is output only from the HD/SD-SDI terminal.
[ HD/SD-SDI & HDMI] There is output from the HD/SD-SDI and HDMI OUT terminals.
[ HDMI] There is output only from the HDMI OUT terminal.
[Ò AV OUT] There is output only from the AV OUT terminal.
COPY

   Find Your Products By Category