Canon Camcorder XA20 User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder XA20 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 187
 
Appendix: Menu Options Lists
150
[OLED Brightness]: Sets the OLED screen to one of two brightness levels. You can use this to make the
screen brighter when recording in bright places, for example.
[OLED Dimmer]: When set to on, the illumination sensor will detect the surrounding brightness and the
camcorder will automatically adjust the screen's brightness accordingly. When you need to carefully
monitor picture quality when recording, keep this setting set to off.
• Changing the brightness of the OLED screen does not affect the brightness of your recordings or
the brightness of the playback image on a TV.
• Using the [ Bright] setting will shorten the effective usage time of the battery pack.
• When demo mode is not on or activated and the compact power adapter is connected, this setting
will automatically change to [ Bright].
• When [OLED Dimmer] is set to on, the camcorder's screen will automatically become dimmer if the
camcorder is left without any operation for 3 minutes. Operate any control on the camcorder to
return the screen to its previous setting.
[OLED Mirror Image]: When set to [i On], this function reverses the image on the screen horizontally
when you rotate the OLED panel 180 degrees toward the subject. In other words, the screen will show
a mirror image of the subject.
[OLED Color Balance]: Allows you to adjust the color balance of the OLED screen. Adjust the [B] (blue)
and [R] (red) bars by touching [+] and [-]. You can check the results on the screen.
[VF Brightness]: Sets the viewfinder screen to one of two brightness levels. You can use this to make
the screen brighter if it is difficult to see.
[Notification Sounds]: A beep will accompany some of the camcorder's operations.
• While pre-recording (A 92) is activated, the camcorder will not emit any notification sounds.
[Wireless Remote Control]: Allows the camcorder to be operated with the wireless controller.
[Tally Lamp]: Activates the tally lamp when the camcorder is recording, the wireless controller is being
operated, the battery level is low or a memory card is full. When set to [j Off], the tally lamp will not
turn on in these cases. The tally lamp is located on the handle unit so make sure you attach it to the
camcorder in advance.
[Powered IS Button]: Determines the operation mode of the assignable button set to [È Powered IS]
(A 64).
[Î Press and Hold]: Powered IS will be activated while you hold the button pressed down.
[Ï Toggle On/Off]: Each press of the button will turn the Powered IS function on and off.
[Set WB Priority]: You can press an assignable button set to [Ä WB Priority] to switch between the
current white balance and the white balance setting selected for [Set WB Priority].
[Focus/Zoom Ring Direction]: Changes the direction the focus/zoom ring needs to be turned.
[Focus/Zoom Ring Response]: Selects the sensitivity of the response when operating the focus/zoom
ring.
[Focus Preset Speed]: Determines the speed at which the focus changes to the preset position.
[Battery Info]: When you are using a battery pack that is compatible with Intelligent System, this option
displays a screen where you can verify the battery charge (as a percentage) and the remaining
recording time ( mode) or playback time ( mode).
• If the battery pack is exhausted, the battery information may not be displayed.
COPY

   Find Your Products By Category