0

Out of 0 Ratings

Owner's of the Canon Camcorder XA20 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 187
 
Exposure Adjustment
70
To adjust the Touch AE function for highlights (Highlight AE)
Certain subjects, like clouds or white objects, are easily overexposed and can end up appearing as
bright areas where all detail is lost. Using the [Highlights] setting, you can touch the brightest area
inside the y frame and the camcorder will automatically make corrections so that area is not
overexposed. When you touch a dark area in the picture or the highlights are too bright, the
camcorder may not be able to correctly adjust the exposure.
After step 1 above:
1Touch [w].
2 Touch [Highlights] and then touch [K].
Touch [Normal] to return the camcorder to normal Touch AE settings.
To use backlight correction
When recording in situations in which the subject is constantly backlit, you can use backlight
correction to make the entire picture brighter, especially dark areas. This will take precedence over the
p > [Auto Backlight Correction] setting, which is useful in situations in which the subject is not
constantly backlit.
1Open the [° BLC Always On] screen.
[FUNC.] > [° BLC Always On]
2 Touch [ON] and then touch [X].
° appears on the screen.
Alternatively, you can set an assignable button to [° BLC Always On] (A 97). In that case,
press the assignable button to turn the backlight correction on and off.
NOTES
Setting the exposure compensation is not available during infrared mode.
The camcorder will return to automatic exposure if the camcorder is turned off, the power switch is
operated or the recording program is changed.
•If you set q > [CUSTOM Dial & Button] to [y Exposure] (A 96), you can adjust the exposure
compensation value with the CUSTOM dial and button.
COPY