Canon Camcorder XF200 User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder XF200 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 246
 
149
Playback
English
Available playback types
NOTES
• There is no audio during any of the playback types listed in the previous table.
• During some special playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.)
in the playback picture.
• The speed indicated on the screen is approximate.
• During frame advance, the time advanced between frames depends on the video configuration used:
0.2 seconds (for 1280x720/59.94P MXF clips) or 0.5 seconds for other video configurations.
• You can press the DISP. button to turn the joystick guide display on and off.
Adjusting the Volume
During playback, audio will be output from the monaural
built-in speaker (on the grip) or from the stereo ×
(headphone) terminal. When you connect headphones to
the × (headphone) terminal, the built-in speaker will be
muted. The audio signal will also be output through the
3G/HD-SDI terminal*, MON. terminal*, HDMI OUT terminal
and AV OUT terminal.
* only.
Press the HEADPHONE +/- buttons to adjust the
volume.
NOTES
• For details on changing the audio channel, refer to
Selecting the Audio Channel
(A 166).
• You can also adjust the headphone or built-in speaker
volume with the [¡ Audio Setup] > [Audio Output] >
[Headphone Volume] or [Speaker Volume] setting.
Playback type Operation
Fast playback
Buttons: Press the Ø or × button.
Joystick: During playback, push the joystick up or down.
Wireless controller: Press the Ø or × button.
Repeat to increase the playback speed to approximately 5x J 15x J 60x the normal speed.
Frame advance/reverse
Joystick: During playback pause, push the joystick up or down.
Wireless controller: Press the Ô or Ó button (during playback pause).
Skip to the beginning of the
next clip
Buttons: Press the Ù button.
Joystick: Push the joystick right.
Wireless controller: Press the ß button.
Skip to the beginning of the
current clip
Buttons: Press the Ú button.
Joystick: Push the joystick left.
Wireless controller: Press the à button.
Skip to the previous clip
Buttons: Press the Ú button twice.
Joystick: Push the joystick left twice.
Wireless controller: Press the à button twice.
Return to playback mode
Buttons: Press the Ò button.
Joystick: Press the joystick itself (SET button).
Wireless controller: Press the Ò button.
× (headphone) terminal Speaker
C OPY

   Find Your Products By Category