Canon Camcorder XF200 User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder XF200 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 246
 
Menu Options
208
[Reset]: Reset various camcorder settings.
[All Settings]: Resets all the camcorder’s settings to default settings, except for the hour meter.
[Camera Settings] ( mode only): Resets the white balance, iris, gain, shutter speed,
[~ Camera Setup] settings and custom picture settings to default settings.
[Assignable Buttons]: Resets the assignable buttons to default settings.
[Tally Lamp] ( mode only): Allows you to set whether the front and rear tally lamps illuminate while the
camcorder is recording.
[POWER LED]: Allows you to set whether the power indicator illuminates while the camcorder is on.
[Media Access LED]: Allows you to set whether the CF card access indicators or the SD card access indicator
illuminate while the camcorder is accessing a CF card or SD card.
[LAN (Ethernet) LED]: Allows you to set whether the LAN access indicator illuminates when the camcorder is
accessing a network via the LAN cable.
[Genlock Adjustment] ( mode only): The phase difference between the external Genlock signal and the
camcorder is initially set to 0. This function allows you to adjust it within the range of approx. ±0.4 H (-1023 to
1023). When setting to 1000 or more or -1000 or less, set the first field to 10 or -10, respectively.
[MXF] > [Clips] settings ( mode only)
[Title Prefix]: Determines the first 2 characters of the clip name. Combined with the [Number Setting] setting,
this constitutes the 6-character clip name.
[Number Setting]: Determines the last 4 digits of the clip name. Combined with the [Title Prefix] setting, this
constitutes the 6-character clip name. Select [Set] to assign a desired number to the first clip you record or
select [Reset] to reset the number to [0001]. The numerals increase every time a clip is recorded.
[MXF] > [Set Metadata] settings ( mode only)
[Country Code]: This identifier is the country code defined by ISO-3166-1 and is to be entered starting from the left.
[Organization]: This identifier represents the organization that owns or operates the camcorder and can be
obtained by registering with the SMPTE Registration Authority. If the organization is not registered, enter [0000].
[User Code]: This identifier designates the user. Leave this blank if [Organization] is set to [0000].
[Delete Last Clip]: ( mode only): Deletes the last clip you recorded. This setting option will not appear if
you turned the camcorder off since recording the last clip.
[Reset Hour Meter]: The camcorder has two “hour meters” – the first keeps track of total operation time and the
second keeps track of operation time since the last time the second hour meter was reset with this function.
[Certification Logos] ( mode only): This setting displays certification logos that apply to this camcorder.
[Firmware] ( mode only): You can verify the current version of the camcorder’s firmware. This menu option is
usually unavailable.
[¥ My Menu] ( mode only)
Menu item Submenu Setting options A
[Edit] [Register] [Cancel], [OK] 30
[Move] [Cancel], [OK]
[Delete] [Cancel], [OK]
[Reset All] [Cancel], [OK]
C OPY

   Find Your Products By Category