Canon Camcorder XF200 User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder XF200 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 246
 
85
Adjusting the Focus
English
NOTES
• Peaking/Magnification appears only on the camcorder screen. It will not appear on an external monitor
connected to the camcorder and will not affect your recordings.
• You can use the [£ OLED/VF Setup] > [Peaking] > [Peaking 1] and [Peaking 2] settings to set the color,
gain and frequency of the two peaking levels independently of each other.
• When using the camcorder’s screen to focus:
- The camcorder features professional video scopes (A 108). You can display the edge monitor to help you
focus even more accurately.
- You can use peaking together with the edge monitor. In such case, the gain and frequency of the peaking
effect will be adjusted automatically according to the gain settings of the edge monitor.
Push AF
While using manual focus (MF, A 83) or autofocus at a [Normal]
or [Medium] speed (Normal AF, Medium AF, A 81), press the
PUSH AF button and hold it pressed down.
• Autofocus is temporarily activated at the highest speed (Instant AF) as
long as you hold the PUSH AF button pressed down.
NOTES
• All the NOTES for the autofocus section (A 82), apply also to Push
AF.
• Push AF is not available when [~ Camera Setup] > [AF Mode] >
[Face AF] is set to [Face Only] and a face has not been detected in the
picture.
Detecting and Focusing On Faces
The camcorder can detect a person’s face during autofocus mode,
automatically focus on it, and even track it if the person moves. When
there are a number of people in the picture, one person (with the white
face detection frame) will be determined to be the main subject and the
camcorder will focus on that person’s face. You can also change the
person selected as main subject.
1 Open the [Face AF] submenu.
[~ Camera Setup] > [AF Mode] > [Face AF]
2 Select the desired option and then press SET.
• or will appear on the left of the screen.
3 Point the camcorder at the subject.
• If there is more than one person in the picture, the camcorder will automatically select one person it
determines is the main subject. The camcorder will indicate the main subject with a white face detection
frame and other faces with gray frames.
• If necessary, push the joystick left/right to change the main subject when there is more than one person.
[~ Camera Setup]
[AF Mode]
[Face AF]
[Off]
C OPY

   Find Your Products By Category